HANDRAIL
COVERS
|
|
|
|
|
Installation Instructions
1. Measure length of handrail to determine length of Safe-T-First handrail cover to be installed. 2. Transfer that measurement to Safe-T-First handrail cover and cut off excess length with a sharp utility knife. 3. Wipe off handrail with a commercial cleaning solution to remove and surface dust, dirt, or grease. 4. Remove protective paper from ashesive strip on handrail cover. 5. CAUTION: Adhesive sticks on contact, DO NOT touch the underside of handrail cover to handrail until handrail cover has been correctly positioned; making certain that the yellow photoluminescent strip is facing up. 6. Place Safe-T-First handrail cover on handrail and press firmly in place to adhere handrail cover to the handrail. 7. Rub entire surface of handrail cover firmly with clean, dry cloth to ensure uniform contact of adhesive to handrail surface.
Care and Maintenance Wash the surface with a neutral pH detergent and warm water solution, as required. |
|
||
|
Copyright
© Safe-T-First 2000. All rights reserved. |
utility knife
