MARKING
TAPE
|
|
|
|
|
Installation Instructions
1. Make certain that the surface on which the marking tape is to be installed is clean, dry and free of dust, dirt, grease, loose or scaling paint or wallpaper, etc. 2. Remove protective paper from adhesive strip on back of marking tape and position it carefully without actually touching the wall surface. 3. CAUTION: Adhesive sticks on contact. DO NOT touch the back surface of the marking tape to wall surface until marking tape has been correctly positioned. Once marking tape touches wall surface, repositioning marking tape will NOT be possible. 4. After Marking Tape has been correctly positioned, press it firmly in place by rubbing entire surface with clean, dry cloth or wallpaper seam roller to ensure uniform contact of adhesive to wall surface. 5. To cut marking tape to shorter length, measure accurately and cut, using sharp utility knife or scissors.
Care & Maintenance Wash the surface with a neutral pH detergent and warm water solution. |
|
||
|
Copyright
© Safe-T-First 2000. All rights reserved. |
utility knife