SIGNAGE
|
|
|
|
|
Installation Instructions
1. Exit signs should be placed on exit door or wall immediately adjacent to exit doorway. 2. Exit signs should be placed in a low location (18" or less) from the floor. 3. Determine location for sign. 4. Remove release paper from back of sign. For best appearance, take care that sign is level. 5. Press sign firmly on door or wall surface and firmly roll entire surface with a small wooden roller such as a wallpaper seam roller, or rub with a clean, dry cloth to ensure good adhesion. Care & Maintenance Wash the surface with a neutral pH detergent and warm water solution. A liquid, acrylic floor finish may be applied, if desired, to ease maintenance. |
|
||
|
Copyright
© Safe-T-First 2000. All rights reserved. |
clean, dry cloth